2023 Scag Power Equipment 30" SFC-30 Belt Drive Walk Behind

$2,799.00

$2,799.00

Key Features

New/Used New
Usage0 Hours
Availability In Stock
LocationDiamond Outdoor Products
Primary ColorOrange
Stock # SFC30-7CV-S
Condition Excellent

Product Features

Dealer Notes
Welded and fabricated using military-grade steel for years of dependable performance, the SFC-30 Finish Cut Walk-Behind Mower is no pushover. Packing big productivity and versatility into a compact form, this commercial-grade machine delivers a beautiful, professional quality-of-cut, helping you put the finishing touches on the job or at home.

Description

30" fully fabricated steel cutter deck, Kohler 224CV engine - recoil-start engine, Swivel Front Caster

Features
  • Mow With Ease - Front Swivel Caster Wheels: Front swivel caster wheel model offers increased ease of manueverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.
  • Powerful Transmission & Engine Combo - Maximum power for tough cuts: The combination of a GT MV702 best-in-class transmission and Kohler CV224 engine bring the power for optimum performance in the toughest of cutting conditions.
  • Discharge - Mulch - Bag - 3-in-1 versatility: The SFC30 delivers the ability to discharge, mulch or bag. All options come as standard equipment, allowing the operator to change on the fly as needed. Discharge: discharge chute - Mulch: deck plug and mulch plate - Bag: bagging baffle, mulch plate and fabric bag
  • Oversized Adjustable Controls - Achieve Maximum Comfort: Oversized handles feature internally routed cables to protect from potential snags. Handle features tool-free adjustment, up and down, to fit operator height preference. Additional vertical adjustment setting for transportation or storage.
  • Operator Control Panel - Ergonomic Controls: Angles of operator station controls match the natural angles of your outstretched hands. All controls are within easy reach: blade brake engagement, drive engagement, recoil start, throttle/choke, hour meter and park brake.
  • Scag Level Quality-Of-Cut - Unmatched Performance: The large cutting chamber helps process more grass while being able to eat through wet and lush spring time grasses more efficiently. Cutter deck discharge opening is oversized for its class.
  • Offset Blade Set Up - Simplified Deck Drive System: An offset blade design is less complex and easier to maintain than traditional timed deck setups. This more robust system results in potential belt replacements taking less than half the amount of time to repair/replace compared to timed deck systems. Image shown with bagging baffle.
  • Fully Fabricated And Welded Steel Frame - Military-Grade Steel - Frame: Extra-strong, fully fabricated steel frame (not cast aluminum). The Military-Grade steel spec used on the SFC30 is over 200% stronger than standard drawing steel found in common stamped frames and decks in this machine class.
  • Single Point Height-Of-Cut Adjustment - Fine-Tuned and Simple: Adjust the height-of-cut from a single location rather than at all four corners or having to adjust the front and back tires separately. Refine your height settings with adjustments from 1.5" to 5" in .25" increments.
  • Fully Fabricated And Welded Steel Cutter Deck - Military-Grade Steel - Deck: Extra-strong fabricated (non-stamped) steel cutter deck features 14-gauge, grade 100 Military-Grade steel deck shell, 12-gauge spindle reinforcement plate and 1/4" side reinforcement bar, all while delivering the quality-of-cut you'd expect from a Scag mower.
Specifications
  • SFC30-7CV: 30" fully fabricated steel cutter deck, Kohler 224CV engine - recoil-start engine
  • SFC30-7CV-CA: 30" fully fabricated steel cutter deck, Kohler 224CV engine - recoil-start engine (California)
  • SFC30-7CV-S: 30" fully fabricated steel cutter deck, Kohler 224CV engine - recoil-start engine, Swivel Front Caster
  • SFC30-7CV-S-CA: 30" fully fabricated steel cutter deck, Kohler 224CV engine - recoil-start engine, Swivel Front Caster (California)
  • Length - Transport (handles in upright transport position): 41"
  • Length - Minimum (handles in highest operating position): 66"
  • Length - Max (handles in lowest operating position): 73.5"
  • Tracking Width: 28.75"
  • Width (w/ discharge chute): 36.75"
  • Width (w/ discharge block off plate): 31.5"
  • Height - Lowest Operating: 36.75"
  • Height - Max Operating: 45.25"
  • Height - w/ Handle Bar in Storage Position: 57.5"
  • Operating Weight - Bagging: 220 lbs.
  • Operating Weight - Mulching: 214 lbs.
  • Operating Weight - Discharging: 213 lbs.
Other Specifications
  • Total Fuel Capacity: 1 gallon (0.37 gallon capacity for California models)
  • Rear Tires: 10.5" x 3" rubber tire w/ glass-filled polypropylene wheel
  • Front Tires: 9" x 2.25" rubber tire w/ glass-filled polypropylene wheel
  • Drive System Type: GT MV 702 Transmission
  • Forward Ground Speed: Up to 4 mph
  • Parking Brake: Hand lever
  • Cutting Widths: 30"
  • Type: Extra-strong, fully fabricated and welded steel cutter deck. Offset blade, non-timed deck setup.
  • Cutting Height: 1.5" to 5" in .25" increments.
  • Blade Type: Optimized for maximum performance whether discharging, mulching or bagging
  • Deck Lift: Hand lever. Single-point adjustment.
  • Construction: 14-gauge, grade 100, Military Grade steel deck shell with 12-gauge spindle reinforcement plate. 1/4" trim side reinforcement bar offers extra protection against impacts.
  • Spindles: Aluminum housing with sealed ball bearings.
  • Blade Engagement: Blade brake clutch allows operator to disengage cutter blades without shutting off the machine.
  • Discharge, Mulch, Bag: Standard
  • Bag Capacity: 2.5 Bushels
Accessories
  • Front Swivel Caster Wheels

General

Transmission GT MV 702 Transmission
Fuel Capacity 1 gal.

Shopping Tools