Toro 5000 Series MyRIDE® 52" (132 cm) 25 HP EFI 747cc (72955)

$16,699.00

Overview

Availability Brochure

MakeToro

Model5000 Series MyRIDE® 52" (132 cm) 25 HP EFI 747cc (72955)

Product Features

Description

5000 Series MyRIDE® 52" (132 cm) 25 HP EFI 747cc (72955)

Take productivity and comfort to a new level with the Z-Master 5000 with MyRIDE® Suspension System. Power through any job with a powerful 25 HP (18.4 kw) Kohler Command Pro EFI 747cc engine and tough 52" (132.1 cm) TURBO FORCE deck. Ride in comfort with the customizable MyRIDE Suspension System, featuring up to 3.6 inches of platform travel, to save your body from tough terrain.

Highlights

Tough on Jobs, Easy on Backs - Toro's MyRIDE Suspension System absorbs the bumps so you can comfortably crush jobs faster.
Power-Packed Performance - With a 25 HP (18.4 kw) Kohler® Command Pro EFI 747cc engine.
52" TURBO FORCE® Cutting Deck - Enjoy years of reliable performance with a fully tubular frame and 7-gauge steel deck.
EFI Fuel Efficiency - Kohler's closed-loop EFI design improves fuel efficiency by up to 25 percent.

Features

Deluxe Handcrafted Seat with Arm Rests: Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.

Specifications

Engine: 25 HP* (18.4 kw) Kohler® Command Pro EFI 747cc
Fuel Capacity: Gasoline - 12 gallons (45 L) single-point fill
Adjustable Discharge Baffle: Standard, tools-free
Adjustability: 5 point adjustment on rear shocks
Air Filter: Heavy-Duty Canister Air Cleaner
Blade Tip Speed: 18,500+ ft/min (5,640 m/min)
Blade Type: 1/4" (6 mm) thick heat-treated steel
Carrier Frame: 3" x 1-1/2" (7.6 cm x 3.8 cm) tubular steel
Caster Tires: 13" x 6.5"- 6" (33 cm x 16.5 cm - 15.2 cm) flat-free semi-pneumatic
Comfort Platform: MyRIDE® Suspension System
Deck Design: 80-Grade 7-gauge 52" (132 cm) TURBO FORCE® w/bull-nose bumper
Discharge Chute: Rubber
Drive System: Hydraulic unitized pumps and wheel motors
Drive Tires: 23" x 9.5" -12" (58.4 cm x 24.1 cm - 30.5 cm)
Ground Speed: 10 mph (16.1 kph) forward
Height of Cut: 1" - 5.5" in 1/4" (2.5 - 14 cm in 6 mm) increments
Hour Meter: Standard
Hydraulic Fluid: Premium synthetic
ISO Mounts: Qty 4, 2.5" 3-D isolation mounts
Platform Travel: 3.6"
ROPS: Folding; standard
Shocks: 1 Center / 2 Rear
Seat: Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
Spindle Bearings: Greaseless ball bearings
Spindle Housing: 9" (22.9 cm) diameter cast aluminum
Steering Controls: 1-5/8" (4 cm) dia. levers; adjustable

NOTES:

*The gross horsepower of this engine was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.